Details
These artificial grass adhesive cartridges are designed for bonding artificial grass to a variety of surfaces and jointing tapes.
The adhesive is tolerant to use in damp and cold conditions, with the final bonds being fully resistant to changeable climatic conditions.
- Packed in 310ml cartridges.
- Simple application for artificial lawn construction.
- Green coloured adhesive to match artificial grass.
- Single component adhesive can be used directly from the cartridge (with a suitable applicator).
Please see below for further information on product usage.
Usage Guidance:
- Ensure the sub-floor is smooth, clean, sound, and free from dust, loose particles, or contaminants such as oil, which may affect adhesion.
- Dampness can be tolerated but any surface water should be removed.
- Aqua Bond Adhesive should be applied to the substrate and spread with a notched trowel at a coverage rate sufficient to leave ridges of adhesive high enough to transfer to the back of the grass.
- In order to consolidate the bond whilst curing takes place it may be necessary either to roll the surface periodically over the next two hours or to apply weights to hold the surface in contact during this time.
- Open times and curing times are dependent on both temperature and humidity and will be shortened in warm, moist conditions.
Please Note:
The adhesive is subject to slight foaming when curing takes place in damp conditions and care must be taken not to apply excess adhesive which may form a thick layer visible through the carpet.
